Night shop takeoff

RoughRun

Seat-true pipe takeoff. Stack the run the way it sits on the wall. Cut length includes the cup.

Face to face Gap plus both seats
Center to center Subtract face, add cup
45° offset Travel × 1.414
Joint family Copper · PEX · PVC · CPVC · iron

Copper fittings on a dark navy blueprint bench

From the wall

The cup swallows length you cannot see

Open a route, then lay straight cuts, elbows, and tees in the order they hang. Takeoff writes the stick. Spec rolls the buy list.

Stack straight cuts, elbows, tees, couplings, and adapters the way they sit from the boiler to the last valve.
Trace — the wall

A face-to-face gap is shorter than the stick you cut. RoughRun adds the seat at each end. A center-to-center drawing subtracts the fitting face, then adds that seat back.
Takeoff — the cup

Couplings, elbows, tees, adapters, and reducers roll up next to stick counts. Share the spec before anyone drives to the yard.
Spec — the buyer

Socket depth and center-to-face for the fittings you actually buy. The fitting in your hand wins if the numbers disagree.
Yard — the chart

On the bench

Empty wall, then a mapped loop

Welcome names the order. Trace draws Cedar boiler loop to scale. Spec turns those cuts into sticks and fittings you can share.

RoughRun welcome: lay the run in order — Before — the wall

Trace map of Cedar boiler loop with elbows and a tee — After — the mapped run

Privacy

RoughRun does not collect personal data. Routes you name, cuts you measure, and purchase lists you share stay on this device. Nothing is uploaded for analytics or advertising. This notice is effective 6 November 2026. If you have a question about what stays on the phone, write using the address on Support.

Support

For App Review or a field question about RoughRun, email Oleksandr Reka at oleksandrreka@yevraziiatreidynhtov.org. Mention the route name, pipe family, and whether the cut was face-to-face or center-to-center so the answer can follow the same seat math.